v1.png  +86 18086742168

v2.png   hxchem@hxadditives.com

Login | Register
产品中心
Home > Products > Odor Remover > Odor Remover HX-B

Odor Remover HX-B

    Odor Remover HX-B

    Odor Remover HX-B is a functional additive developed for polymer materials to eliminate unpleasant odors during plastic processing. It interacts with volatile small molecules generated in extrusion and granulation procedures. This additive mixes uniformly with various resins, suitable for PP, PE and recycled plastic materials. It can be applied in modified plastic pellets, daily plastic products and rubber goods. It brings stable performance under common processing temperatures and helps improve the sensory experience of finished plastic products.
  • Share:
  • Contact us Inquiry

Odor Remover HX-B

1. Introduction

Chemical Name: Porous Aluminum-Silicon Inorganic Compound Chemicals and Organic Compounds                  

Structure: acid gas neutralizer

Mixtures of porous carrier and other organic compounds 

3.jpg


2. Physical Properties

Appearance:  Granule                                 Specific Surface Area:300-500 m²/g

Heat-Resistant temperature> 600      Odorodorless

3. Product Description 

HX-B is an adsorptive reactive deodorizer. It is mainly composed of inorganic mineral adsorbents for volatile organic compounds (VOC), such as toluene, formaldehyde, acetaldehyde, aromatic hydrocarbons, amines, etc.Harmful gases such as organic sulfides and chlorides have strong adsorption, non-toxic, non-corrosive, good thermal stability, good rheological and thixotropic properties.It has good dispersibility and heat conductivity.The new modified odor adsorbent has large specific surface area and strong adsorption capacity. The ions between mineral layers can react with aldehydes, ketones, amines, organic sulfides and sulfides.Organic chloride produces strong chemisorption, so secondary volatilization due to temperature rise will not occur in raw material processing and production. It is especially suitable for PP and PP.PE, PVC, PA, PS and other resins. It has obvious application effect, simple operation, uniform dispersion in resin and good thermal stability. The whole series of products pass through

SGS.Authentication, ROSH Authentication

4Application

Application Suggestions: Coatings & Adhesives: 0.8% - 1.8%

Rubber & Elastomer & Polyurethane: 0.8% - 2.0%

Plastic PP PE PA PS ABS EVA POM: 1.0 - 2.0%

Plastic PVC: 0.8 - 2.0% (Addition of Recycled Material: 2.0% + (Addition of Recycled Material according to Recycled Material Proportion)          

5Method of application

Mix the deodorant with the raw material as well as possible. The better the mixture, the better the effect of the deodorant and the granule.It is suggested that after granulation, it should be placed for 24 hours before baking and comparing to detect odor and VOC

6. Packing and Storage

Every 25kg are packed in one kraft paper bag with PE liner, and single PE bag inside.


ONLINE MESSAGE

Please fill in a valid email address
Captcha Can not be empty

RELATED PRODUCTS

No search results found!

This website uses cookies to ensure you get the best experience on our website.

Accept Reject